cured product的例句大全

Inthisintroductioninclude that room temperature setting heat-cured product.

该文介绍了室温加热养护产品.

Improving Properties of the Cured Product of Epoxy Resin with Boron-Amine Complexes

环氧树脂&硼胺络合物固化产物性能的改善

The porous monolith is obtained by washing and drying the cured product or thermal degradation of thermoplastic.

固化产物经洗涤干燥将溶剂去除后或使热塑性塑料高温降解即可得到多孔结构的聚合物材料。

However, the high benzoxazine resin curing temperature, low cross-linking density of the cured product, brittle and other defects restrict its application in some special fields.

但是，苯并恶嗪树脂固化温度偏高、固化产物交联密度偏低、性脆等缺陷制约了其在一些特殊领域的应用。

TGA analysis showed that the cured product has a initial decomposition temperature and the end of temperature of 329.4 ℃, 417.5 ℃, which demonstrate that this new epoxy resin have good heat resistance.

用热重分析的方法分析了在此条件下固化产物的分解温度和终止温度分别为329.4℃和417.5℃，这表明所合成的新型环氧树脂具有良好的耐热性能。

The research of micro-structure of the solidified body shows that the process achieved an effective fixed mechanism, through the micro-structure of encapsulated and activated carbon physical and chemical adsorption of cured product.

对固化体微观结构的研究表明该工艺通过水泥水化产物的微观结构包封与活性炭的物理化学吸附共同作用实现毒性有机物有效固定的机理。

According to the different industries, the requirements for epoxy curing agents are not the same. Excellent performance of the epoxy curing agent can make the cured product has good stability, high heat resistance and corrosion resistance effect.

根据各行业的不同需求，对环氧树脂固化剂的要求也不尽相同。性能优良的环氧树脂固化剂可以使得固化产物具有稳定性好、耐热性高、抗腐蚀效果好等特点。

The influence of oleoyl polyamine prepared by oleic acid and triethylene-tetramine on the properties of cured product of epoxy resin and methyhetrahydrophthalic anhydride ( MTHPA) was studied.

研究了油酸和三乙烯四胺的生成物油酰多胺对环氧树脂和甲基四氢苯酐固化物性能的影响。

A congestion cured inks made with the product has perfect characteristic.

同时将产物用于UV固化油墨配方,性能理想.

When the amount of PGTE in the E-51/ Polymercaptan system is 30 pbw, the tensile strength and the tear strength is increased 116% and 126% separately, without substantial decrease of the curing rate and thermal stability of the cured product.

当PGTE加入量为30（pbw）时，室温快速固化特性和固化物的耐热性基本不变，铁片粘接的剪切强度与不均匀扯离强度则分别提高了116%和126%。